Casper2000 Posted May 7, 2009 Share Posted May 7, 2009 Can anyone tell me if there is a way to pull the input shaft out of the tc with out breaking it all the waydown. The last person that rebuilt it must have used super glue on it with the gasket sealer :wall: Any info is greatly appreciated as i can't afford to break anything at this point getting it brokedown. Link to comment Share on other sites More sharing options...
64 Cheyenne Posted May 7, 2009 Share Posted May 7, 2009 Yah, you gotta split the case. I just swapped mine last week. FYI, there are 3 "slots" around the circumference of the case for you to put a screwdriver in to pry against. Also be aware that you have to remove the rear retainer and extension housing before the case will come apart. Like I said, I just did this, I've never tore a TC apart before, it wasn't hard. PM me with questions if you want. Link to comment Share on other sites More sharing options...
Casper2000 Posted May 10, 2009 Author Share Posted May 10, 2009 Cheyenne thanks i was fearfull of breaking it after i pulled the bolts and it still didnt come apart. Was hoping for an easy tear down :doh: but not this time. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now