Jump to content

Shocking question...


Recommended Posts

:D :D I'm having a brain fart... Can I mount my Bilstein 5150 shocks in either direction or just can down? Or do I have 5125's.. another brain fart. BTW, this is my rear shocks, NOT remote res.

 

(My fronts are body mounted,remote res. shocks.)

 

CW

Link to comment
Share on other sites

can up either with 5150s or 5100s/5125s. the 5150s have the fixed resi.

Just to be clear.. your saying it is OK to mount EITHER way.

 

ALSO, I have 5100 shocks out back...... man it SUX to forget stuff!!!

 

CW

 

nope, I'm 90% certain they have to be can up. every pic i see of them mounted, the can is up.

Link to comment
Share on other sites

OK, thanks guys!!

 

I have an experimental mount installed and will try it and see if my "issues" go away. (Once its back on the road.)

 

 

I think its a tad too long now, I would also like to be more up on the tube, but this is only a test mount to see of my suspension issues subside.

 

CW

Link to comment
Share on other sites

can up either with 5150s or 5100s/5125s. the 5150s have the fixed resi.

Just to be clear.. your saying it is OK to mount EITHER way.

 

ALSO, I have 5100 shocks out back...... man it SUX to forget stuff!!!

 

CW

 

nope, I'm 90% certain they have to be can up. every pic i see of them mounted, the can is up.

OK...one more time...they are a gas shock...they do not 'have' to be in either direction. A gas shock can be mounted either way...it does not matter.

Link to comment
Share on other sites

can up either with 5150s or 5100s/5125s. the 5150s have the fixed resi.

Just to be clear.. your saying it is OK to mount EITHER way.

 

ALSO, I have 5100 shocks out back...... man it SUX to forget stuff!!!

 

CW

 

nope, I'm 90% certain they have to be can up. every pic i see of them mounted, the can is up.

OK...one more time...they are a gas shock...they do not 'have' to be in either direction. A gas shock can be mounted either way...it does not matter.

 

I'm not saying your wrong. i've just never seen them mounted with the shaft up.

Link to comment
Share on other sites

i just called shane at bilstein tech because i couldn't remember why i mounted them up.

 

you are correct you can mount them either way. however, they recommend you mount them can up

to keep the can out of the dirt, as much as possible. there are some circumstances where they would

recommend them down. but that's few and far between. for our purpose, jeep, mounting up is correct.

 

also, on any race vehicle, dirt, i have never seen them mounted down.

 

comancheB.gif

Link to comment
Share on other sites

I just called Shane at Bilstein tech because I couldn't remember why I mounted them up.

 

You are correct you can mount them either way. However, they recommend you mount them can up. To keep the can out of the dirt, as much as possible. There are some circumstances where they would recommend them down. But that's few and far between. For our purpose, jeep, mounting up is correct.

 

Also, on any race vehicle, dirt, I have never seen them mounted down.

 

comancheB.gif

 

I took you guys at your word already, :yes: but thanks for the double check!!! jamminz.gif :cheers:

 

CW

Link to comment
Share on other sites

i got hold of a guy i crew for with a buggy at different races. i asked him the same questions.

he said the only thing he can figure is you need approximately 6" for the can up and 4" for the shaft when its up. so he thinks its a space issue for most cans that are mounted down. also, it depends with gas or hydraulic how the stock is designed. a very few gas are designed for the can to be down.

 

at the races he has seen some trucks with the shock can down but he doesn't know why.

most are up. hope this helps! :yes:

Link to comment
Share on other sites

Look's like you have 5100's .I think one reason that 99% of the shock tubes are up has to do w/ keeping shock oil on the seals.What's the travel on your Bil's?

 

IIRC, they are 10" of travel.

 

cw

Link to comment
Share on other sites

Dang, is that before and after pic's, you guys must use some serious road salt. I'm curious to hear how your shocks work out,how much lift do you have? I'd like to try and get 12" of travel out back. Bilstein makes a short body 7100 that I would love to get.

Link to comment
Share on other sites

Dang, is that before and after pic's, you guys must use some serious road salt. I'm curious to hear how your shocks work out,how much lift do you have? I'd like to try and get 12" of travel out back. Bilstein makes a short body 7100 that I would love to get.

 

Rust is and issue here, but not nearly as bad as some folks have to deal with!!

 

Here is a before and after:

 

 

 

 

 

CW

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...