mvusse Posted April 21, 2009 Share Posted April 21, 2009 Well, went to install new driver side axle, ABS axle I took off a 93 Grand Cherokee. Turns out ABS axles do not fit on 89 and older hubs as the ABS sensor ring interferes with the hub. Is it possible to press the ABS ring off the axle? If it is, would I probably still foobar the axle trying to do so? And why are the 90 and newer hubs $100 when the 89 and older are only $70? Link to comment Share on other sites More sharing options...
mjeff87 Posted April 21, 2009 Share Posted April 21, 2009 they press on, so it's logical that you could press them off. But I wouldn't get too fancy about it.....just drill a hole and split them with a cold chisel ;) Link to comment Share on other sites More sharing options...
mvusse Posted April 21, 2009 Author Share Posted April 21, 2009 Thanks. Grinder, chisel and hammer made quick work of it. Wheel is back together! Link to comment Share on other sites More sharing options...
mjeff87 Posted April 22, 2009 Share Posted April 22, 2009 :cheers: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now