Lenard Posted April 12, 2009 Share Posted April 12, 2009 Hey every body, havent been on here for awhile cause i sold my jeep last year, BUT......got another one! :D anyway to my point, the vaccum lines going to the front axle were ripped off when i got it, the metal ones are still there just the rubber ones from the bottom of the engine to the axle gone, so i got some to replace them but can't figure out which one to hook up were :oops: every once in awhile 4x4 works but most of the time not, so if any one could help me with a picture or something would be nice :help: Link to comment Share on other sites More sharing options...
Pete M Posted April 12, 2009 Share Posted April 12, 2009 Don't waste the effort replacing them. Rip them out and cap the one that comes out of the engine. Then shift the CAD permanently. Then 4x4 will always work when you want it. :thumbsup: There are a few ways to do it, here's one: http://www.comancheclub.com/forums/view ... 636#p21636 Link to comment Share on other sites More sharing options...
mvusse Posted April 13, 2009 Share Posted April 13, 2009 After I have lost my vacuum lines three times while wheeling now, I have to agree. Link to comment Share on other sites More sharing options...
Lenard Posted April 13, 2009 Author Share Posted April 13, 2009 ok thank you guys. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now