r.j.c.omanche Posted December 26, 2008 Share Posted December 26, 2008 i have an ax4 trans and np231 t-case. whenever i am in 4wd-low and i put the transmission into reverse the trans grinds and pops out of gear. :???: reverse works good in high range, 2wd or 4wd. and the all the forward gears work good in 4-lo. anyone else had this problem? Link to comment Share on other sites More sharing options...
redneck23ms Posted December 26, 2008 Share Posted December 26, 2008 try adjusting the t-case linkage. sounds like its popping out of gear when its in reverse. Link to comment Share on other sites More sharing options...
Pete M Posted December 26, 2008 Share Posted December 26, 2008 If that is the issue, here is the ajustment procedure: Link to comment Share on other sites More sharing options...
vzehler Posted December 26, 2008 Share Posted December 26, 2008 Soak that linkage rod with PB blaster a couple times before you try to tackle the adjustment procedure. Let it soak for a day or so in between each application. When I tried to adjust mine it would not move freely as the procedure calls for. Turned out to be a big pain. Link to comment Share on other sites More sharing options...
r.j.c.omanche Posted December 27, 2008 Author Share Posted December 27, 2008 awesome. thanx guys!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now