ocskipper Posted December 10, 2008 Share Posted December 10, 2008 My comanche is running rough. I just bought it and there was oil all over the motor. I degreased it to find the leak and came up empty. It didnt leak over the next few days so I figured it was just 125,000 miles worth of build up. The oil was low however, and I ended up overfilling it. Oil spilled out of the filler and went everywhere, so I cleaned it again. I then did a full oil changed and replaced the plugs. Before the change it was running very rough, spitting lots of smoke and shuttering pretty bad with a loss of power. I figured it would go away with the change and plugs but it still runs rough when I first start it up and am getting some smoke. After about 10 miles or so it seems to settle down but isnt running as strong as I would like it to and still shutters a bit in neutral. I only changed the oil last night so does this sound like left over oil burning off or could I have blown a seal or something. The only other thing that came to mind was fouling the tps or something when I was washing under the hood. ????? On a side note, The little ccv filter on the back of my valve cover is confusing me. There is a small piece of tubing comming out of it but it doesnt connect anywhere, where does it go? And do I have a pcv valve or not because I have this ccv system. I am also trying to get it to pass smog, any common problems? Thanks! Link to comment Share on other sites More sharing options...
shelbyluvv Posted December 10, 2008 Share Posted December 10, 2008 My comanche is running rough. I just bought it and there was oil all over the motor. I degreased it to find the leak and came up empty. It didnt leak over the next few days so I figured it was just 125,000 miles worth of build up. The oil was low however, and I ended up overfilling it. Oil spilled out of the filler and went everywhere, so I cleaned it again. I then did a full oil changed and replaced the plugs. Before the change it was running very rough, spitting lots of smoke and shuttering pretty bad with a loss of power. I figured it would go away with the change and plugs but it still runs rough when I first start it up and am getting some smoke. After about 10 miles or so it seems to settle down but isnt running as strong as I would like it to and still shutters a bit in neutral. I only changed the oil last night so does this sound like left over oil burning off or could I have blown a seal or something. The only other thing that came to mind was fouling the tps or something when I was washing under the hood. ????? On a side note, The little ccv filter on the back of my valve cover is confusing me. There is a small piece of tubing comming out of it but it doesnt connect anywhere, where does it go? And do I have a pcv valve or not because I have this ccv system. I am also trying to get it to pass smog, any common problems? Thanks! What year and what size motor? Your sig says 97 Comanche? :hmm: :nuts: Link to comment Share on other sites More sharing options...
ocskipper Posted December 10, 2008 Author Share Posted December 10, 2008 My bad, it is an 87 with the 2.5L 4 speed. Thanks for the heads up, I will change the sig. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now