Jump to content

Huntingman2706217

Members
  • Content Count

    64
  • Joined

  • Last visited

1 Follower

About Huntingman2706217

  • Rank
    Comanche Fan

Profile Information

  • Location
    Griffin, G.A.
  • Interests
    offroad crap and huntin...
  1. Its really not that weak... i mean i jump in and out of the sides like crazy... stepping on them and everything... no issues... i hit the back right top corner on a rock and it didnt move the whole bed side... it did dent the sheetmetal though... if it was weak it would have pushed it in... Also my ammo boxes are mounted to the back bedside and the floor so that probly helped there... my beds not beat up on the inside to bad... for its life its had a thick rubber mat so its near perfect other than a little surface rust... when i get back in march and am done welding stuff to it I'm gonna have it lineX'd as well... i wanna try and keep the fender look to it but will be hard with a air shock in there... may have to build a tube flare with a hole for the shock or something... Thank yas!
  2. Located in GA between macon and atl... hour from each... pickup will always save shipping... some is to heavy to ship. I'm also leaving for Afghan sunday night so must be quick about this or else they will sit in my shed till March! OEM Sending unit... worked great when pulled last week... cut the wire plug off though so will have to splice your old on it... this was before i knew that people wanted them... $100 shipped OEM gas tank... no issues... $40... no shipping OEM gas tank skid $75 pickup only OEM tail lights no nicks on the inside edges or anywhere else... $70 shipped OEM case skid $50 shipped OEM tow hooks and mounts $60 shipped Superlift reservoir shocks for XJ, ZJ, TJ, MJ... my guess is they are made by someone else with Superlift stickers... i bought these and then forgot i bought them when purchased some bilsteins... stupid mistake but oh well now... i was gonna chop the top and weld on a old rear shocks top and run on the back but going air shocks and links now so just won't need... 25.55 extended 15.52 collapsed... $100 shipped... I think thats it but i feel like I'm forgetting a lot of stuff... please txt me as i don't get on CC very much... however i will try the next couple days... 6785886661
  3. ha what up man... you coming to get this skid or not? I'm about to list it on here with some other things... sometime today i hope... i got some other stuff you may want and can make ya a deal on all of it if you come get it..
  4. Thanks yas... its a wrap actually and they are NOT as easy to put on as YouTube says... lol... least not on bubble fenders and your first time trying... lol...
  5. my rear bumper was setup for a bed side also so i need to chop the ends off... i JUST had them lineX'd before this past weekend so i couldnt bring myself to do it... well i tore most that off this weekend so i don't mind so much... just gonna have to wait till next spring... i think if I'm gonna do that I'm gonna go ahead and raise it up flush with the bottom of the beds inside since theres no low bed to cover anymore and if i shorten the bed then itll be even easier.... the bumpers custom made for a XJ actually but i built new brackets so i could mount it to my MJ... works great!
  6. So the plan was Rustys front fenders and bedsides... i had my buddy go ahead and cut off my bedsides and do my fenders while i was still in Afghan... 2.5 months after ordering everything i had still only gotten the front fenders... by this time i was home and had Jeeptoberfest in Ocala FL to make it to so i got tired of excuses on why the bedsides arnt at my house yet and waiting so i canceled my order and decided to go a different rout. After staring it down for some time this is what i came up with... i may not be the first to do this but it is what it is... At the ride everyone was asking where i got the bed from and didnt believe me when i told them it was the inner bed... Tail lights are military LED tail lights made by TruckLite... very good quality and very easy to mount on any flat surface... why the wrangler guys don't all have them i don't know as they should be a direct screw on for them... just gotta be wired in... I put mine in ammo cans which of course double as storage... I took the money from the bedsides and got a rogue bender... i will be tubing the bed the way you see it... basically outlining it with DOM and above the tires will become my airshock hoop for my sterling 10.50 thats going in it this spring when i get back from Afghan again... I may also shorten up the back of the bed since i couldnt seem to keep it off the rocks this past weekend... easy to do when linked... but i need to decide before i tube everything... questions or specific pic requests are cool with me also...
  7. Also if you look at the OEM FSJ cherokees brush guards they are near identical... id guess they are the same thing but a larger version...
  8. I know this is old as dirt... but figured for anyone searching they will find my pics as well... dealer or factory to me its all the same... "jeep" or whoever still made and sold them... kinda like the rock sliders you can buy today for the WK2 as you buy it off the lot... my 90 MJ had all these options... front hooks... full skids front to rear... fog lights... D44 (not a metric ton)... and only thing i know it didnt come with "offroad" wise was the roll bar... though i guess i havent pulled the whole rubber mat up since i got it to look for holes... however i would say they were all factory options that could also be bought at a dealer by the dealer or anyone for that matter... i don't see the dealers swapping in headlight harnesses to get fog lights... just doesnt make sense... same for the brush guards... i agree with that thread the OP here read on another site... they all said they were ugly... ya kinda... but the XJ's and MJ's really arnt the prettiest vehicles in general... kinda cool to have one though knowing they are hard to come by... the bottoms of my square tubing is rusted all to heck so I'm not sure if i can save mine but I'm going to try and repair/rebuild it... i have 97+ conversion now so it may look even weirder but maybe since the bottom is rotted out i can fab it onto a steel winch bumper or something... if it looks horrible ill sell it off to a renix goo roo or something... lol... pics that i have for the sake of others googling!!!
  9. Ive got a tailgate in maroon color... been painted again at some point... no rust... has plastic cover on back and it does have just a couple minor dents... its NOT bushed in like someone set something heavy on it... nice and straight... which is what i found hard to find when i was looking for one... I'm in Griffin GA but traveling to Jeep Beach in daytona this weekend and can bring it with me... JY's all around here want $75 so lets do with that... only pics i got right now...
  10. may look again bud... OEM doors and OEM bed... lol... the only changes are on the front end...
  11. CPS died to replacing it to see if there actually is anything wrong with the motor... so far i havent noticed anything actually wrong...
  12. ill have pics up tomorrow... bought this one Sat and then got a txt back from a guy with a 90 short 4x4 inline 6 D44 2 hours later telling me to come get it after i offered 2k on his 3k price so i couldnt pass it up... went and got it today so now I'm gonna sell this one... before you read much further it does run but is gonna need at least a top end... over heated it and its knocking bad now... its a short bed inline six 2x4 (easy to convert over I'm sure yall know and thats what i had planned) Automatic interior is burgundy with a bench seat... its starting to pull apart at a couple seams but is still in pretty good condition... i didnt see any rust... Its been repainted to stock color... however it was a macco or whatever job... instead of fixing the mirror holes they just stuck screwes in it and painted away... body work is a bit poor but its not in horrible shape... has a couple waves here and there and the pass side back part by the tail light is dented pretty good... so is the one i just bought though and neither were bad enough it stopped me from buying... paints good though no fading or signs of age... pics will show ya... thats really all i know so far... only looked at it about 20minutes and left... ill pick it up tomorrow... dana 35... solid back window... bed liner... new tires... guess thats it for now... its worth sticking a motor in it... thats a guy thats owned 4 manches and 9 cherokees in the last two years... Griffin G.A. $600 pics up tomorrow... also the guy i got it from said someone else wanted it but had to fix trailer first and would get it next weekend... hes got my number but i havent heard from him and I'm a first come first serve kinda guy... 6785886661
  13. no its not home made... RV companies sell them...
  14. bubble wrap or not it doesnt matter... goes by weight... unless itll fit in a flat rate box but its not going to...
×
×
  • Create New...