Jump to content

Renoenvy08

Members
  • Posts

    83
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Renoenvy08

  1. It tells me the files too big
  2. Well I'm finally getting around to fixing/restoring the 90 Eliminator I tried to pick up in 09, First I can't do pics, Everytime I try to upload a pic the site won't let me. This was a daily driver until I picked up another vehicle, anyways it's a white 1990 eliminator 4.0 ax-15 it has a Cherokee rearend (bought it that way), so far I've pulled the interior out (the rear window leaks) found the start of rust on the floor pans, covered the pans with Rust Mort then put undercaoting over them to prevent any new rust appearing, I have the molded part of the headliner minus the fabric so I went to Joann fabric and got some headliner fabric and as I write this the glue is drying, the right front was hit some time in the past so I pulled the nose apart and fixed the bent braces best I could, i also replaced the oil pump when it went out my next little project is replacing all the tie rod ends and center link. I'll try to update my progress as I go, hopefully it will be trail ready next year
  3. I have a 90 eliminator 4.0 5sp not shure what type, when I'm stopping my idle drops to around 200 rpm, if I sit at a light it jumps to 1200 then slowly falls back down,when I driving it runs fine any input? Replaced TPS still does it
  4. Yes there is a check valve. Thanks
  5. The blue vacuum line that runs to my transfer case is not hooked up, I've looked but can't see any loose lines that it might connect to, it goes into 4 wheel with no problems but it's bugging me that it's just flapping in the breeze by my front shock mount
  6. I talked to the guy I got my MJ from he said he only changed axel and went from under to over plus different gear ratio. So now I need to figure out what to do about that thanx everyone, tried to upload pic but was told file too big
  7. I just bought a 90 MJ Eliminator, The guy I bought it from has put Cherokee rearend and springs under it so now the back of my truck sits about 4" higher, how can I fix this problem when I don't have the stock springs?
  8. MJ Eliminator 4.0 AX15 3/90 Sno.co. Washington Daily driver White with grey interior, cloth bucket seats (Bought with a Cherokee rearend and leafs, trying to fix that)
×
×
  • Create New...