Jump to content

88mj2.5

Members
  • Content Count

    34
  • Joined

  • Last visited

3 Followers

About 88mj2.5

  • Rank
    Can Spell Comanche

Profile Information

  • Gender
    Male
  • Location
    Massillon,Ohio
  1. Was wondering if a 97 xj engine harness will mate with a 2001 interior harness? About to get a 01 xj with no motor or trans I have an older motor and don't wanna switch to coil packs
  2. thanks man starting on this on Monday. I have all week off I'm hopping to have it about done by then at least the harness and motor in
  3. Has anyone swaped to a fuel cell? Wondering what pump and regulator to use? Or if this is even possible I'm swapping to a 95 4.0 ho anyone know what gph or psi I need to run with this? Thanks guys
  4. https://www.facebook.com/178449342190713/videos/790351694333805/ Like to the video of the fr1 for the aw4
  5. Awesome thanks guys so basically to use the 95 motor with my 96 harness if have to use a second o2 but the rest should be plug and play and as for the tranny goes I think I got that figured out with out using a Tcu at all http://radesignsproducts.com/site/0cbe6b4845e04ad2ac00dc4b10d9c541/home?url=http%3A%2F%2Fradesignsproducts.com%2FHome.php#2512this guy makes shifters for the aw4 that let you $#!& gears manual just have to wire the silinoids up to micro switches and run a switch for the torque converter lock up should be pretty simple to do I'm gonna go with the fr1 he is still design
  6. 95 ax15 works great have pedals clutch flywheel master cylinder and shifter $500 obo
  7. Nice my second time there it's a pretty nice place And it's either the throw out or I popped a line in the bell housing I haven't even got it off the trailer yet but it's got fluid coming from the bottom of the bell housing. So I figured might as well pull the motor and do the swap while it's apart it can't be to bad other then having to do the entire harness
  8. No problem at all man just want to know what all I'm gonna have to hunt down to do it You go to southington a lot? I take it your from ohio or close to it
  9. I have a 96 motor full harness and everything but the hvac stuff I also have a complete 95 xj that I was going to use the motor out of. Both are or were 5 speeds. I was wanting to know if I could use the 96 harness with the 95 motor and the 95 hvac with the 96 harness? Then what all would I need to make an aw4 work with the 5 speed harness? It's going in my 88 2.5 ax5
  10. I have a 96 motor full harness and everything but the hvac stuff I also have a complete 95 xj that I was going to use the motor out of. Both are or were 5 speeds. I was wanting to know if I could use the 96 harness with the 95 motor and the 95 hvac with the 96 harness? Then what all would I need to make an aw4 work with the 5 speed harness?
  11. I have some motor swap questions with wiring
  12. I was at southington offroad this past weekend and ran into a guy that was on here and I can't remember it username I was in the blue and black COMANCHE on 35s my clutch was out and I was with the xj on 40's. I have a few questions for you if you could get back to me that would be awesome thanks
  13. ok thank you now i don't have to beat my head aginst the wall trying to figure out why things arnt lining up lol
  14. i was wondering if a 3.73 gear would fit the carrier of a 3.55?
×
×
  • Create New...