comanchekidwa

That is a pic of the TNT crossmember.

Sorry it took so long finally got a chance to take a pic of the crossmember and this jeep is wheeled at least ever other weekend and is wheeled hard.

I Modified a cherokee console and had it recovered.. I have not wired it up yet I did it mainly for the extra lights....

I prefer the Claytons kit because it's easier to install. After you install your RE kit you will know what I'm talking about.... I installed a RE kit on a customer's jeep and I said I will never do another one. After drilling the first 8 holes I was tired and I still had 8 more or so to go. It is over engineered and once you go offroad with it and bend it a little and have to remove the skid plate to work on your jeep and you can't get it back on because it's tweaked a little bit..... And as far as the TNT kit goes there skid plate and long arm mount are all in one so in order to remove the trans you have to remove the hole skid plate which sucks Azz and there skid plate bends really easy I have a club member that has the kit and his skid bent the second trip out........ Just my .02

the console is out of a xj I cut the back of it off and had it recovered.. the light aren't functional yet but I do plan on making them work....

I used the Rubicon Express bracket kit... I just welded to the center section the one thing I didn't do was cut off the cast in spring perch which I would of wished I did ... here are a couple of pics not the greatest

Thanks on the bumper home built... I love my maxxis best tire I've ever run not that I have a lot to compare it to .. But they work great up here in washington there great on the rocks and do good in the mub and work great in the snow.......

Thanks.

My comanche well it started life as a 1990 2wd 5speed, that I turned into a 4wd and auto. I'm running Clayton's long arms front with rock krawler 6 in coils and RE track bar that was customized. I did a SOA on the rear. I used dana 44 wagoneer axles front and rear with 5.13's with detroits. The front has yukon alloys and yukon super joints with warn hubs. I'm running 37 12.5 15 maxxis creepy crawlers on 15x8 wheels. I've done intergated rock rails useing 4x6 3/16 box tubing and done cross over steering I added bucket sets out of a xj and center console and customized a overhead console for it ... and now for some pics... This is how it looked when I got it... here it is after the lift and trimming.... Checking for flex and clearance... Here's the steering This is at Naches local wheeling place.... This is the first trip out before the rock rails up at Evan Creek local wheeling spot..... My rock rails installed..... Another pic of the rock rails and some needed paint... Down in Moab, Utah having fun..... Moab rim in Moab... Moab pritchett canyon on two wheels.... My bed lay out.... overhead console....