Jump to content

Recommended Posts

Posted

Hi all. Haven't had much issues with the jeep until just recently. Sometimes when I start it the idle will go up to around 3000 and stay there. It goes away after I drive for a minute, but if I turn it off and restart it it does the same thing. Any ideas what might be causing this?

 

Chris

Posted

there has been some info IRT to Hi Idle if you do a search :brows: my problem was with the EGR valve needed replacement and the problem went away. do some research on this site so that you'll additional inforamtion to go by jamminz.gif

Posted

A couple of things could cause this.

 

Bad Throttle Position Sensor

 

A vaccum leak

 

My 2.5 is doing that right now, it has a bad intake/exhaust gasket

 

On a 4.0 the throttle body might need cleaned

 

(IAS)Idle Air Speed motor on 2.5 and (IAC)Idle Air Control on 4.0

 

There are other possiblities but these are probably the most common

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...