Spooky.truck Posted December 2, 2022 Share Posted December 2, 2022 Hiya! A bolt from my trucks lift recently come off, I believe it is part of the sway bar disconnect and have been trying to find the right part to order. It seems like a standard sized bolt with some kind of extra padding around the joint. Link to comment Share on other sites More sharing options...
howeitsdone Posted December 2, 2022 Share Posted December 2, 2022 Drive to ACE or NAPA and bring the Driver's side bolt/nut to match a replacement. Link to comment Share on other sites More sharing options...
Spooky.truck Posted December 2, 2022 Author Share Posted December 2, 2022 I think there is a spacer missing too? Link to comment Share on other sites More sharing options...
howeitsdone Posted December 2, 2022 Share Posted December 2, 2022 Is everything missing on both sides? What would be barring you from looking at the driver's side to know what you need? Not sure why you'd need a spacer. Photo looks like that just slides right into that bracket and bolts down. Link to comment Share on other sites More sharing options...
Airborne Janitor Posted December 2, 2022 Share Posted December 2, 2022 If those are the JKS discos that upper U bracket has a threaded hole that the bolt tightens into, it's not just a bolt/nut that holds it on. Take a look at that uppper U bracket to see if there are threads, if so remove the bracket and straighten it out with press/hammer/anvil/crescent wrench. Then use that bracket to figure out what size/thread bolt you need. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now