Rocker repair recomendations '87

[Ochie]

I just bought a 1987 Comanche that has rusted rockers.

I've researched rocker replacement and every thread seems to be several years old.

I'm hoping for some updated info and guidance.

From what I've learned is that OEM are NLA (of course).

There were some who said that you could use stamped rockers from XJ 2-4 door.

I also read someone mention that MJ rockers are taller than XJ by 1 inch.
Is that so?  I don't mind a bit of modification trimming, fitting, but not if it's not right.

Can someone please recommend the rockers to buy.  Perhaps even a link.

I have no intention of going offroad so the 2x6 tube doesn't interest me.

Thanks

Richard

[SargesBootcamp]

I was contemplating buying a comanche with rusted rockers and did some researching into replacing them. 

 

https://www.c2cfabrication.com/products/1986-1995-jeep-comanche-mj-series-outer-rocker-panel-lh

https://www.c2cfabrication.com/products/1986-1995-jeep-comanche-mj-series-outer-rocker-panel-rh

 

I didn't end up buying that comanche so never did order them : - /

[Ochie]

Some of the threads said the C2C are not stamped and the fit requires a LOT of rework.

Stamped rockers are said to be the ones to get.

Hoping someone can clarify and steer me in the right direction.