kill_burst Posted January 30, 2018 Share Posted January 30, 2018 Could use a little help. I have been finishing up a 8.8 swap and cleaning up/repair small areas/painting the frame. Right above the axle in the rear I have a rusted out area on both sides. I imagine those were the original bump stops and brackets. I just wanted to verify that’s what was there and if those supports/supports had anything thing to do frame support or support for a portion of the bed. Thanks. Link to comment Share on other sites More sharing options...
HOrnbrod Posted January 30, 2018 Share Posted January 30, 2018 Just two threaded holes in the frame where the bump stop and extended aluminum base in this case are bolted to. Link to comment Share on other sites More sharing options...
kill_burst Posted January 30, 2018 Author Share Posted January 30, 2018 Great thank you! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now