SMPLTN Posted May 8, 2017 Share Posted May 8, 2017 Need some help on a wiring question. On top of the distribution block, there's the double wire plug (a gray and a black wire).. Which way does it connect? I was fixing some wiring and figured it could only be oriented one way but seems that either way works. Gray or black wire closer to the firewall? Thanks Link to comment Share on other sites More sharing options...
Eagle Posted May 8, 2017 Share Posted May 8, 2017 Doesn't matter. It's just an ON-OFF switch that closes a circuit if there's a brake failure. Link to comment Share on other sites More sharing options...
SMPLTN Posted May 9, 2017 Author Share Posted May 9, 2017 'Preciate it sir. I thought that may have been the case but wanted to confirm that. Fixing some electrical issues. I also have a bad short due to a leaking clutch master cylinder :grrrr: . Replacing the engine side 'plug' at the firewall and then splicing wires at the air box. Good chance I'll have question on two :) ... I'm also replacing the battery cables. Is that a "stick to the manual" job? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now