Strokermjcomanche Posted June 18, 2015 Share Posted June 18, 2015 I have a 2 brand new Light bars made by Smitty Built with some scratches but no dents (no hardware included) $80 each + shipping . The dimensions are 38" h 54"w and 42" center to center for the bolt spacing for the mounting locations at the bottom . DRB 2 scanner ( missing display ) 25 + shipping . 2 ECM's out of a 89 2.5 Comanche . Both ran good when pulled and came from the south . Both are 5 spd part# 89 53004763 $25 each plus shipping . Xj / Mj front bumper ends ( fit up to 96 ) . I believe these were part of a spoiler and the lower portion has been cut off . $30 for the pair + shipping I can send additional pics if you'd like or if you have questions let me know . Thanks for looking Link to comment Share on other sites More sharing options...
Siopposition Posted June 18, 2015 Share Posted June 18, 2015 Where does the light bar mount too on the truck? Link to comment Share on other sites More sharing options...
Strokermjcomanche Posted June 18, 2015 Author Share Posted June 18, 2015 It's an aftermarket / universal light bar that is intended to be mounted in the bed . Brackets will need to made to bolt it in . Link to comment Share on other sites More sharing options...
teamsmith Posted June 29, 2015 Share Posted June 29, 2015 Where are you located and how much are you asking for one of the litght bars. Without looking up the bed dimensions, do you know how well it would fit in a comanche bed? Link to comment Share on other sites More sharing options...
Strokermjcomanche Posted June 29, 2015 Author Share Posted June 29, 2015 I'll get some pics of it next to my factory Roll bar and post it on here . Link to comment Share on other sites More sharing options...
Strokermjcomanche Posted June 29, 2015 Author Share Posted June 29, 2015 Link to comment Share on other sites More sharing options...
Strokermjcomanche Posted June 29, 2015 Author Share Posted June 29, 2015 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.