jeepjack54 Posted March 20, 2015 Share Posted March 20, 2015 91 Comanche 4.0. I have no turn, brake or hazard lamps. Did some diagnostics today and found that I don't have any power to the Hazard fuse terminal or the hazard flasher. There is power to the turn signal fuse terminal. Checked the hazard flasher for continuity and it is good. Has anyone run into this problem before? I'm also not quite sure if power goes from ignition to flasher to fuse box or the other way around? Can somebody offer some insight? Much appreciated, Jack Link to comment Share on other sites More sharing options...
HOrnbrod Posted March 20, 2015 Share Posted March 20, 2015 This has turned up before. Make sure the turn signal, brake, and parking/tail light bulbs are correct in their front and rear housings, i.e. dual filament bulbs (2057 or compatible) and single filament bulbs (1156 or compatible) are all correct for their appropriate sockets. A single filament bulb in a dual filament socket, or vice-versa, can cause the symptoms you have. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now