ChiefJosh Posted May 11, 2007 Share Posted May 11, 2007 I just finished mounting my new CB, so I thought I'd share what I came up with. I pulled off the lower portion of the dash and reinforced the top edge with a piece of 1/8 x 1" flat stock. I drilled the 3 holes for the mounting bracket and bolted it all together. It finished up really clean. I don't have my console all put back together yet, but I'm gonna run the antenna wire under it back behind the seat. My ash tray/trash thingy was busted anyway, so I just covered it up. I should still be able to use the little tray underneath the radio. I think this would work a little better on an automatic trans, though you'd have to check your own clearances. As it is on mine, my knuckles just graze the CB if I shift too hard, otherwise it seems to be okay. Link to comment Share on other sites More sharing options...
tjbliley Posted May 11, 2007 Share Posted May 11, 2007 Looks good. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now