Bigsarge173 Posted April 9, 2014 Share Posted April 9, 2014 So I'm running into a problem. I already have the Rubicon Monotubes for a 3.5" lift. I only want a 2" lift on the my MJ. I called Rubicon and the rep didn't sound like he was sure but he said that I can do a 2" lift but I need to put on bump stoppers. He said that lots of people run with bigger shocks all the time. Can anyone advise me? I was about to order the a budget lift (spacers and add a leaf) kit from EBay but I want to see what everyone has to say. Thanks! Link to comment Share on other sites More sharing options...
Blue XJ Posted April 9, 2014 Share Posted April 9, 2014 You can get extended bumpstops that replace the stock ones, I think they are an inch or so longer. Another option is getting a body lift block (or hockey pucks) and bolting it down to the spring perch on the axle, just figure out what length you would need. I went with both on mine to get the correct amount of up travel Link to comment Share on other sites More sharing options...
Bigsarge173 Posted April 9, 2014 Author Share Posted April 9, 2014 Where is a good place to buy the pucks? Link to comment Share on other sites More sharing options...
Blue XJ Posted April 10, 2014 Share Posted April 10, 2014 As in the hockey pucks? Any sporting good store would have them, just drill a hole in the middle and bolt them down. As far as body lift blocks, any offroad shop should have them. The one by me charged me $5 each for 3" body lift blocks to use as bumpstops. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now