Tylertondro Posted November 17, 2013 Share Posted November 17, 2013 I bought an 88 jeep comanche 4.0l inline 6. I have been rebuilding the engine and somewhere along the way I have lost the bolts in the back of my power steering pump. If anyone knows of the right size bolts so I don't have to take it back off that would be amazing! Link to comment Share on other sites More sharing options...
bradseals Posted November 18, 2013 Share Posted November 18, 2013 I also have my engine out of my Comanche and I happened to be smart enough to put the bolts back in the holes I took them from thank god but there are two bolts that hold the pump to the bracket I'm almost positive there 13 mm but I just used a 9/16 to get this one out (its was already loose and the socket doest fit too awfully snug but the bolts are two inches long (both of them from head to tip ) and both have washers that don't come off (there pressed on or whatever and the threaded part of the screw appears to be 5/16 wide with a tape measure but I'm sure what the thread pattern is exactly hope this helps and let me know if you need to know anymore bolt sizes I'm pretty much back at the same step as you reassembling Link to comment Share on other sites More sharing options...
bradseals Posted November 18, 2013 Share Posted November 18, 2013 also it may help to say the first 1/4 inch or so doesn't have threads Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now