DirtyComanche Posted February 12, 2007 Share Posted February 12, 2007 I've got this for the model 63 (SWB). Image Not Found And a couple more out of the same book which detail the body mounts for the bed. The problem is it is a frame/body repair diagram and everything is measured off the centre of datum points. Which is fun, but not really what I want. So, anybody have any others? Out of any of the other FSMs? Link to comment Share on other sites More sharing options...
jbhill Posted February 12, 2007 Share Posted February 12, 2007 couldu post the bed mount one? are u wantin to straitin your frame? when ever i do frame work i go off the center line of the frame... Link to comment Share on other sites More sharing options...
DirtyComanche Posted February 12, 2007 Author Share Posted February 12, 2007 It's straight enough already. Maybe out 1/2" on the front... I've decided to part ways with the unibody. Sorta. I wasn't planning to totally reveal my plans until I'd figured them out... But the gist is to build a new frame with new running gear then pop my old cab off the current one and swap it over. That way I can play around with everything on the frame and wheel the current buildup as is until the frame and everything attached to it (minus the cab and a bit of work related to that) is good to go. Or, it's an idea I'm toying with but may not do because of time constraints. Anyways, I've been working on the dimensioning of this project for a while here, and a diagram that wasn't ment just for alignment would be nicer... I think I've got part of the problem figured out now... JB, I'll get you those diagrams... Your's a SWB or LWB? Looks like they're the same... But, if you could, show me more pictures of how you cut out the cab and attached it to your frame. You ditched the floors and a bunch of the firewall. It's looking like this is the way to go to actually make it sensible... Link to comment Share on other sites More sharing options...
DirtyComanche Posted February 13, 2007 Author Share Posted February 13, 2007 Here's a LWB frame, which shows the location of the bed mounts. Image Not Found Here's the details on the bed mounts. I should have used a higher resolution... Image Not Found Oh yeah, have fun with it being in milimeters... Link to comment Share on other sites More sharing options...
binderbart Posted February 13, 2007 Share Posted February 13, 2007 if this helps any, to convert metric to standard simply multiply by .03937 example: 13mm X .03937 =.5118->13mm is a tad bigger than a 1/2 inch wrench. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now