BEATNGU Posted February 6, 2012 Share Posted February 6, 2012 :ack: It all starts here.... and here... let the fun begin..... :thumbsup: Link to comment Share on other sites More sharing options...
BEATNGU Posted February 6, 2012 Author Share Posted February 6, 2012 So i got rid of the plastic bedliner and plastic toolbox, and picked up a rollbar from a 94 tacoma..... we will have pictures of that later... before i start stripping the cherokee I'm gonna get it running perfecto... I'm pretty sure it has a cracked flywheel... ive replaced every sensor, plugs, wires, grounds, i mean anything and everything you could replace i bought new and changed it...!!! even three CPS's.... and i didnt buy no cheap crap either... i gave 300 for the kee, and have put another probably 400 chasing a friggin miss.... :fs1: Link to comment Share on other sites More sharing options...
BEATNGU Posted February 7, 2012 Author Share Posted February 7, 2012 So the bed is off, gas tank drop for cherokee tank is welded in. and roll bars are mounted in bed... gonna buy a new flywheel tomorrow and see if that fixes cherokee...( i hope so )... gonna start on prepping bed for spray in liner today, maybe do some interior cleaning and upgrading also, got a clock waiting to be put in till i do dash swap and stuff from cherokee.... I'm getting excited on the build i want it finished already and have only just begun..... Link to comment Share on other sites More sharing options...
BEATNGU Posted February 13, 2012 Author Share Posted February 13, 2012 New front joints.... Link to comment Share on other sites More sharing options...
BEATNGU Posted February 13, 2012 Author Share Posted February 13, 2012 Going in for lift.... Link to comment Share on other sites More sharing options...
BEATNGU Posted February 13, 2012 Author Share Posted February 13, 2012 Gas tank drop for cherokee tank sending unit to clear bottom of bed.... Link to comment Share on other sites More sharing options...
BEATNGU Posted February 13, 2012 Author Share Posted February 13, 2012 Using old tank for now, till i do swap. But should work just fine... Link to comment Share on other sites More sharing options...
BEATNGU Posted February 13, 2012 Author Share Posted February 13, 2012 1994 Tacoma roll bar mounted in bed... Link to comment Share on other sites More sharing options...
BEATNGU Posted February 13, 2012 Author Share Posted February 13, 2012 better picture of bar.... Link to comment Share on other sites More sharing options...
89Comanche4x4 Posted February 14, 2012 Share Posted February 14, 2012 Good start! I like it... Verrrrry clean :banana: Link to comment Share on other sites More sharing options...
BEATNGU Posted February 14, 2012 Author Share Posted February 14, 2012 Thank's Bro..... Link to comment Share on other sites More sharing options...
BEATNGU Posted February 14, 2012 Author Share Posted February 14, 2012 starting on lift.... Link to comment Share on other sites More sharing options...
BEATNGU Posted February 14, 2012 Author Share Posted February 14, 2012 moving quickly now...... Link to comment Share on other sites More sharing options...
BEATNGU Posted February 14, 2012 Author Share Posted February 14, 2012 sorry no more progress pictures but i have these.... its at the alignment shop now should get it back tomorrow..... :jump: Link to comment Share on other sites More sharing options...
BEATNGU Posted February 14, 2012 Author Share Posted February 14, 2012 thought id show off the clean motor.... now for the front end swap.... more pics to come yall...!!! :thumbsup: Link to comment Share on other sites More sharing options...
BEATNGU Posted February 14, 2012 Author Share Posted February 14, 2012 and my license plate... hahaha Link to comment Share on other sites More sharing options...
BEATNGU Posted February 17, 2012 Author Share Posted February 17, 2012 trimmed front fenders today, took about six inches off the front .... no more rubbing.... Link to comment Share on other sites More sharing options...
BEATNGU Posted February 18, 2012 Author Share Posted February 18, 2012 Ever get the feeling your just talking to yourself...... :nuts: Link to comment Share on other sites More sharing options...
86customanche Posted February 20, 2012 Share Posted February 20, 2012 :yes: I get that all the time. Pics of your trimming? Link to comment Share on other sites More sharing options...
freakjeep93 Posted February 20, 2012 Share Posted February 20, 2012 lol hard to comment on something ya can't see.. lol it sounds like it comin along but Link to comment Share on other sites More sharing options...
BEATNGU Posted February 20, 2012 Author Share Posted February 20, 2012 oh no that was just a crazy comment, i was talking to myself as i was cutting away... hahaha ill get pics today though... :ack: Link to comment Share on other sites More sharing options...
BEATNGU Posted February 21, 2012 Author Share Posted February 21, 2012 pictures as promised..... Link to comment Share on other sites More sharing options...
BEATNGU Posted February 21, 2012 Author Share Posted February 21, 2012 also added these..... lol i had too....... :thumbsup: Link to comment Share on other sites More sharing options...
86customanche Posted February 21, 2012 Share Posted February 21, 2012 Much better :clapping: you did a nice job on the trimming. i like the fenders back on Link to comment Share on other sites More sharing options...
BEATNGU Posted February 21, 2012 Author Share Posted February 21, 2012 THANKS, next I'm building a holder for my spare and hy-lift extreme jack... and then bumpers and a winch.... :banana: no more sticky spots for me............ i hope !!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now