airspeed Posted January 8, 2012 Share Posted January 8, 2012 Found a nice receiver hitch at the pull & pay but don’t know how to get it off. I put a wrench on the bolts and they just spin the nuts inside the box frame member. There is no access to the back side to hold the nuts? Not sure how to cut the bolt heads, any ideas… I can't afford to buy any new battery powered tools. Link to comment Share on other sites More sharing options...
MJCARENA Posted January 8, 2012 Share Posted January 8, 2012 open end wrench thru the end of the frame rail. If your wrench is not long enough just tape an extension to it. Link to comment Share on other sites More sharing options...
airspeed Posted January 8, 2012 Author Share Posted January 8, 2012 That my friend is a good call. :bowdown: I would not have seen that opportunity with the rear bumper in place. :doh: I have a set of deep offset wrenches that will do the trick. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now