casey Posted January 22, 2007 Share Posted January 22, 2007 I'm not familiar with the differences between the MJ and the XJ rear springs and perch placement. In the FSJs the J truck has it's springs farther outboard on the axle than the Cherokee. And a wider rear axle. I just grabbed an XJ parts rig for an FSJ project. It has an 8.25 in the same ratio as my MJ. I was planning to swap the 35 for the 8.25. I took some quick measurements in the rain yesterday (both axles are under rigs), and it looks like the XJ has the perches set farther apart. By only an inch...is that so? Link to comment Share on other sites More sharing options...
DirtyComanche Posted January 22, 2007 Share Posted January 22, 2007 It's a little more than an inch. If you use metric numbers you could be accurate, but, it's about 42" (MJ) vs 43.5" (XJ). Link to comment Share on other sites More sharing options...
casey Posted January 22, 2007 Author Share Posted January 22, 2007 It's a little more than an inch. If you use metric numbers you could be accurate, but, it's about 42" (MJ) vs 43.5" (XJ). Yep, that's about what I measured. Thanks. 8) I have some perches and will go ahead and do the rear in SOA. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now