Blue88Comanche Posted April 13, 2011 Share Posted April 13, 2011 i was under my jeep today about to bleed the clutch.. (it has been leaking at the master cylinder and i finally ordered the replacement part) and i could wiggle the bleeder tube a good bit. should that wiggle at all? Also while i was under there i needed to check my tranny fluid... (oil was leaking a good bit and not from the engine... and it finally stopped leaking) it had been getting hard to shift into gear. could some one tell me if the big nut in the center is the refill or is it the hole above it which was missing a nut... :hmm: [/img] Thanks Link to comment Share on other sites More sharing options...
Blue88Comanche Posted April 13, 2011 Author Share Posted April 13, 2011 try this link to the pic Link to comment Share on other sites More sharing options...
JeffN Posted April 13, 2011 Share Posted April 13, 2011 if the slave cylinder is internal the tubes will wiggle some Link to comment Share on other sites More sharing options...
Geonovast Posted April 14, 2011 Share Posted April 14, 2011 My condolences on the transmission. Don't put any money into that thing beyond oil. If it craps out on ya, find yourself an AX-15. Link to comment Share on other sites More sharing options...
Blue88Comanche Posted April 14, 2011 Author Share Posted April 14, 2011 thanks for posting that pic.. i could not figure out how to post it.. so my tranny is on the way out? Link to comment Share on other sites More sharing options...
Geonovast Posted April 14, 2011 Share Posted April 14, 2011 Probably not. Just sayin' that if/when that box o' rocks craps out, don't fix it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now