Andy Posted April 10, 2011 Share Posted April 10, 2011 Looking for a little advice here, maybe even a pic or two would be great. I recently picked up an '88 Comanche and when I started digging into it found it to be in worse shape than I thought - slowly ironing the kinks out though. One of the things that I was hoping to get some information on is where the arm for the rear brake compensation valve should sit when the truck is empty - somewhere along the line someone has put on a home made lift kit on this truck and they just strapped the arm all the way up (simulating a full load). I haven't driven the truck much to know if this is causing any problems or not, but it would make sense to me to have it working - if anyone can let me know what the best solution for this would be I'd appreciate it, thanks. Link to comment Share on other sites More sharing options...
HOrnbrod Posted April 10, 2011 Share Posted April 10, 2011 http://www.comancheclub.com/forums/viewtopic.php?f=9&t=17968&hilit=adjustable Link to comment Share on other sites More sharing options...
Andy Posted April 11, 2011 Author Share Posted April 11, 2011 Thanks for the reply, exactly the information I was looking for! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now