Cajun Posted March 14, 2011 Share Posted March 14, 2011 Has anyone ever removed the A/C condenser and re-routed the belt? My A/C is done, and I disconnected (via Sawzall) the refrigerant lines and electrical, leaving the non-op condenser. I would like to eliminate the hollow condenser all together, but don't know if a different pulley needs to be installed in it's place or the belt re-routed. Any ideas? It's a '92 4WD 242ci with a 5-speed.... Link to comment Share on other sites More sharing options...
91coMANche Posted March 14, 2011 Share Posted March 14, 2011 Its a compressor and you don't have to buy the pulley to take its place because you have the compressor doing that. When its not engaged its literally just a pulley. If for some reason you don't like looking at the compressor then you can get a Dorman dummy pulley ac eliminator pulley and bracket. Link to comment Share on other sites More sharing options...
JeffN Posted March 14, 2011 Share Posted March 14, 2011 there is an idler pulley that goes in it's place, it's an aluminum thing that takes the place of the AC compressor. Link to comment Share on other sites More sharing options...
Cajun Posted March 14, 2011 Author Share Posted March 14, 2011 Sweet...so the belt size remains the same, I assume. Thanks.....Cajun Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now