Jump to content

Recommended Posts

Posted

Fxing to buy a 1987 4x4 4.0 I6, first I need: Price:

 

Ball Joint on driver side worn and shakes....need a ball joint.

 

AC - anyone know more info on this portion, :dunno: to fix it ?

 

Also, have any door panels (2) ?

Posted

I don't quite get what your asking :dunno:

 

You want prices on what the parts cost???

 

Or you want cost of what the above items would run???

 

 

Like, door trim panels, out of a P-N-P $12

 

4 door XJ's can provide this, there a direct swap.

 

Ball joints (Moog $43) (Service grade $14)

 

But, you generally change both upper and lower on the same side, at the same time, and Should do all 4 at the same time. Plus, when you get into it, you could find bad tie rod ends too :dunno:

 

AC could be a can of Arctic-freeze or a complete conversation to R134a and new dryer and e-vac and could run up to $200+ at a shop.

 

If your buy this '87, allow your self some repair $$$ The truck is.........23 years old.

 

I always figure in around $500 on repairs for any used vehicle, unless it was well cared for, which is not always the case, that's why the seller is selling it :roll:

 

That also reflects the price there asking, and what I'm willing to pay :brows:

Posted

Asking: Does anyone have these parts or know where to get them for a good price?? :help:

 

Need:

 

Left & Right Interior Door Panels

Dash

Floor liner

Seats/benchseat

 

Ball Joints i guess

 

Possibly A/C seals

Posted

Oh..........

 

Well.....the door panels I told you, or someone on here might have a set

 

 

What color?????

 

I have dashes and panels, but I'm too far away from you, shipping would kill the deal.

 

The rest of the parts, try.......www.rockauto.com for good pricing on New parts.

×
×
  • Create New...