lostissues Posted August 28, 2006 Share Posted August 28, 2006 i was thinking about ordering replacement rockers from shermanparts, but there is also the cab corner that i have to patch up, I'm wondering how far back the replacement rockers go, if anyone has a picture of them and where they start/end i would be greatful, also if anyone has any suggestions on ways to repair cab corners like a replacement or a method any help would be apreceated. Jonathan Link to comment Share on other sites More sharing options...
87manche Posted August 28, 2006 Share Posted August 28, 2006 cab corners are tough to get looking good. You'll need a prebent pice to fit. I don't think anyone is making replacement cab corners, best bet is to see if you can't source a junkyard beast with decent metal and cut it out. Make sure you cut it bigger than your patch, an I mean a lot bigger. You'll end up cutting out 2-3 inches from the rust spot to find good clean metal. Link to comment Share on other sites More sharing options...
jbhill Posted August 28, 2006 Share Posted August 28, 2006 replacement panels usually only go to the factory seam. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now