com_mako Posted February 19, 2009 Share Posted February 19, 2009 hello, does someone is using the procomp suspension lift kit in from of a MJ? I know that the kit is for a XJ, but in from, it is the same suspension... if yes, are you using it with the MX6 shock? how about the coil spring, too stiff or too soft ? :???: thank ! Link to comment Share on other sites More sharing options...
BLHTAZ Posted February 19, 2009 Share Posted February 19, 2009 The kit for an XJ will work fine on the front of you MJ. I don't recall ever running across anyone using a ProComp on an MJ, but I have sold & installed the ProComp coil spring kits on other Jeeps and the customers were happy. ProComp has issues with leaf springs being very stiff, but the coils are fine. Link to comment Share on other sites More sharing options...
wolfpackjeeper Posted February 19, 2009 Share Posted February 19, 2009 My XJ has a procomp 3.5in front lift that I am very happy with. I think the rear leaves are Rancho full packs. Over all I like it. It has not sagged much at all, it might have settled 1/4in in about 7 years. I did not flog it much, but it did get a few beatings. It was my DD so I had to take it easy. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now