Jump to content

96xj to 87MJ


Recommended Posts

Ok enlighten me. I was under the assumption that it would just be a matter of hooking up a ground and a hot. Mine does have the factory wiring harness still in it but it is a base base base 87 model MJ. :drool:

Link to comment
Share on other sites

it's not that simple. You've got ground and hot,. but you also have the wires from the drivers door that control the passsenger side door. IIRC the passenger side door gets it's power from the drivers side door. Don't take my word for it, but I know there's wiring that goes from one door to the other. If you didn't want the drivers door to control the passenger side doo r you could probably just wire ground and hot to the motor and switch.

Link to comment
Share on other sites

Well that sounds simple enough..I could just run the hot and ground to the driver door then run the wires from the driver door to the psgr door in some loom and tuck em under the dash somewhere..I am thinking for 100 bones i can't not buyem.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...