ComancheBSJ90 Posted December 20, 2008 Share Posted December 20, 2008 I was experiencing a short which was burning out the taillight and instrument panel fuse. I located the short in the driver side blinker lamp socket wiring and fixed it. That fixed the problem. Now One month later after my engine heated up to 110C the Instrument panel fuse burnt out again. Replacing the fuse just burns it out. I tried to put a 7.5 amp in place of the 5 amp Instrument panel fuse and that blew out the Tail Light 10 amp fuse. Are there any known issues with the Instrument panel wiring and or wiring that would lead to my problems? Other then ripping the dash apart where would an obvious place to start? A melted wire sheath that hit the overheating block? A good place to start with a voltmeter? Thanks you guys for the suggestions... One day my baby will be flawless... I hope! Link to comment Share on other sites More sharing options...
Randy in Maine Posted December 20, 2008 Share Posted December 20, 2008 Have you been over here and read wildman's post? viewtopic.php?f=2&t=13447&hilit=tail+AND+light+ANd+fuse Link to comment Share on other sites More sharing options...
ComancheBSJ90 Posted December 21, 2008 Author Share Posted December 21, 2008 Have you been over here and read wildman's post? http://www.comancheclub.com/forums/view ... t+ANd+fuse Thanks for the read. A day later I dropped another 5 amp fuse in and this time the instrument panel worked! I guess I'll have to route through the wiring to find the short and take suggestions from that Link, thanks again. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now