Akula69 Posted July 2, 2008 Share Posted July 2, 2008 Well, I've hit another snag on the jeep from hell... Can anyone advise me on how the engine harness comes apart from the interior fuze panel? I have removed the two screws inside but cannot get the wiring halfs to part. I have removed the two plastic pieces on the harness inside the engine compartment (thinking they were some kind of retainer) without success. Image Not Found Image Not Found Image Not Found Image Not Found As always, your assistance is appreciated! :cheers: Link to comment Share on other sites More sharing options...
Boilermaker Posted July 2, 2008 Share Posted July 2, 2008 I've pulled apart a couple of '91s and '92s; not sure if this applies to other years. On the engine side between the two halves of the engine harness there is a small bolt. I'm almost positive the bolt needed a 1/4" socket. I found removing the two torx bits on the interior fuse box helpful. It allowed me to move that whole connector up and out so i could get at the bolt with just a ratchet and extension. Link to comment Share on other sites More sharing options...
dakal Posted July 2, 2008 Share Posted July 2, 2008 x2 Link to comment Share on other sites More sharing options...
Akula69 Posted July 3, 2008 Author Share Posted July 3, 2008 Yes - you are correct...a 1/4 inch bolt holds the pieces together. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now