Search the Community
Showing results for tags 'signals'.
-
Hey all, it's been almost 4 years since I had a comanche, and I must say my new acquisition isn't being cooperative. Turn signals worked when I looked at it day of purchase, now only about 2 weeks later, neither left nor right signals work. New fuses, both flasher relays under the dash are new, all new bulbs except headlights throughout. Hazard flashers work however. Arrows in dash light up when hazards are on. Nothing, not even relay clicking when I switch either left or right turn signal. Attempted with just key on run and vehicle engine running, neither produce a result. Heard about fluid leaking from the clutch master cylinder down to the fuse box, mine does leak but fuse box appears dry. Is there a plug or other fuse and/or relay I'm missing? All bulbs are new incandescent. Thanks in advance.
-
Thanks to the advice in my no start thread, I have a Comanche that's running again! Now, I decided to tackle the turn signal issue. I don't have any brake lights, but the running lights work. I also don't have turn signals. When I flip the lever I don't have anything pop up on the dash- there is no annoying turn signal clicking or anything of that nature. What do you think could be the cause of this, or what should I do to test other possibilities? Also, I noticed that when I drive, the thermostat gauge is illuminated red, but the truck is not over heating. It has been around 3 or 4 degrees F around these parts lately and I'm curious if that's causing the recent flare.