Search the Community
Showing results for tags 'rear tow point'.
Found 1 result
-
Not much of a write up but I cut a piece of tubing to fit in the rear hole where a bumper could go 54” long. I plasma cut out my design I wanted. I SHOULD have cut slots in the bumper to recess the tow points to the back of the bumper for more strength. But I welded on the tow points and now to paint and wire in reverse lights on the far sides and run a strip of red lights on the top and tie into the brake lights so the bumper will light up when I brake. I’m just going to weld it to my rear bumper mounts
