Search the Community
Showing results for tags 'dash lost power'.
-
please help - No dash power Hello, I'm doing a 88' to 98' conversion (Hayduke's Operation Comanche RePower) and lost dash power. Before hooking up the 98' doors I could start the engine and the connected guages, odometer, radio, and heater controls all worked fine. I've been trying to get the dome/interior lights to work- repalced door switches, bulbs, testing wiring, and connected doors, and now the headlight switch controled dash lights work, but the needle guages, odometer, radio and heater controls don't work??? I also never got the dome lights to work via the door switches and when the ingition is on one brake light is on brightly, the ground for that harness is not yet connected, I've checked and improved the grounds, checked & cleaned all fuses, relays, etc. checked that all the plugs are connected well. & disconnected the dome light & door switches not sure if I missed something... The engine will start and run well and alternator produces 14+ volts at battery. Earlier the odometer worked but now after much testing it stopped working, A cluster test confirms everything but the needle guages check out. I exposed the ingnition switch but don't know how to test the 98' style switch? What else do I need to try? I'm very close to finishing the conversion then this happens...Very frustrated at this point as the dash was all in, and now it's all torn down again..and the fuse box...and the steering column.... :fs1: I've looked on the Cherokee sites and no solution yet... Any help greatly appreaciated !!!! My focus is getting the dash working again as the dome light can wait!
- 3 replies
-
- dash lost power
- guages
-
(and 2 more)
Tagged with: