Jump to content

cjvaughn

Members
  • Posts

    58
  • Joined

  • Last visited

Everything posted by cjvaughn

  1. I decided to ad up my hours and figured between my father-in-law, brother n law, wife, and I we had around 700 hours in it.
  2. Looks good. I did the same thing only I used an apoxy that I got from the body shop instead of plastic welding.
  3. It took exactly a year started sep2013 finished sep2014. I'm driving as a daily and if only we could talk jeep into bringing back the comanche, as long as it doesn't look like the new cherokee.
  4. I used a base coat clear coat. It was one of DuPont' lower grade paints.
  5. I can try to take some this afternoon. I used the brackets from the xj and drilled holes in the comanche to fit.
  6. Check page 2 near the bottom. That is were the pictures for the rear flares mods are
  7. need some more head room withe the sound bar so we cut the seats down
  8. decided to go all out and bought a accrual chrome grill and a new front emblem.
  9. most people use the stock comanche rear flair so again we stepped outside the box
  10. for the bed it was wrecked on one side so i bought a bed side from one of the venders on here. here is the body work for it.. I would like to say it isn't an exact fit it took a little work to get the body lines right.
  11. also reassembled the header panel bought clear turn signals and bulbed head lights also got a chrome bumper cherokee of course
  12. i have some good news found more pictures of the interior install.
  13. quick repair of the cab vent rubber and well i couldnt find any more pictures of it but what i did was glued a piece of rubber leaving the top open to the orginal frame
×
×
  • Create New...