buck_hunter

Ok will check that out tonight after work. Thanks

Ok thanks...also if my electronic fan ising working could that sensor be faulty or is there another problem to look for....or is there any way to rewire the fan so i have a toggle switch on the dash?

Also. i noticed the sensor next to the valve cover which is the coolant temp sensor? so what is the other thing that screws into the drivers side of the radiator with an plastic connector on the end? it also says coolant temp sensor?

Ok thanks. Are these swappable with anything? basically if i find a cherokee at a JY what year etc would i look for to find a gauge on?

I replaced it. Reason being is when i got the new radiator from the auto store i also told them i needed the sender for my gauge not know what it was that was what they gave me. So i did some searching around and found where it went...hence why it has been replaced lol. So say i do have a bad gauge am i going to have to replace the whole gauge cluster?

Ok got it..i replaced that as well when i did the radiator and its hooked up also....

where would the switch/sender be located...i noticed a sensor of some sort that screws into the driver side of the radiator which has a connector on the end of it...That is all connected

So i got a little problem, bought my jeep a little while back and have been fixing odds and ends on it for a while now. Ever since i bought it my temp gauge has not worked but i just never thought anything about it. Just recently my stock radiator blew a hole in it, so i went out a got a new one. I thought it would be a good time to troubleshoot my non working temp gauge. Long story short i put the new one in and still no temp gauge. I'm still new to the comanche way of doing things lol so any help would be nice...Thanks!

shoulda bought a stihl lol

I realize higher octane is kind of a waste of money. Thats why the first tank i put in was higher octane but now I'm running just regular but still haveing the same problem. I will definatly check the TPS though that sounds like it might be the root of it all. And if you don't mind me asking who did you go though to get your new injectors because i think that may be some of the problem but i don't want junk ones. So if you have any suggestions on where to get a new set, that would be real helpful. thanks for the advise, i will also be checking for vaccuum leaks. Anybody know the eaisest way to find a vaccuum leak??? and also it is a 4.0.

nope fuel is good as well. actually just put some higher octane in it since it has been a while that its been ran.

don't really know how to put this so here it goes. Just got my truck on the road, and now I'm working the bugs out since it hasnt been ran in over 6 years. When I'm driving, no matter what gear I'm in, when i hit a certian low end on my rpm's it seems to have almost no power almost like its not getting fuel at that point. Once i get my rpms up just a little bit she'll pick up and go. Its just that one area. idk if any of that makes sense lol but i have put a new fuel pump and fuel filter on it. Any help would be nice thanks!

Got something a bit weird here. In the process of getting my truck on the road, insurance plates and all that fun stuff. well i call my insurance guy and my vin came up one number short idk why and now he's having a hard time putting it in his computer system. my vin is 16 letters long and all the other 87's are 17. just thought that to be kinda odd.

alright ill go ahead and re bleed them and see if that helps out

it has been like this since i bought the truck. So i started with the front brakes and worked my way to the back. When i put all new in the rear i got a little better brakes but still not much for any pressure until you get to the end of travel. It stops pretty good just doesnt feel right, i feel like there should be more pressure than i am getting. And there is no slop in the rear as far as i can tell both adjusters work fine and adjust properly.