zmjeeps

Hey guys. Sorry I haven't been around lately. I'll try and answer the questions I've seen brought up the best I can. For the piece that wraps around the rear, it would be prohibitively expensive to try and put that on the beside. What I have done in the past is use replacement corners from a CJ/YJ for that curve and just patched the metal in. I have the replacement corners if anyone needs them. My mistake on the 6' bed being the same as the 7' behind the wheel well. In that case, you would have to trim some off the front AND the rear and move the taillight cut out in a little. Not hard to do at all. I've sold one set of bedsides so far and some rockers and floor pans, so I really appreciate you guys having this thread up here. If there are any other questions, please let me know. Thanks, Zack

Hey guys, Glad you all like what I have to sell. For the 6 foot bedsides, the extra foot is between the cab and the wheel, if you will, so all you do is take the 12" off the front of the bedside skin of the 7' and it fits the 6'. So, yes, I have bed sides for the 6' beds. I also have two comanches here out back. One is complete and one is missing the front end sheetmetal and the drivetrain, but the cab and bed are nice. It has a cap on it so even the inside of the bed is nice. Thanks all, Zack

Hello All. I thought I'd join up now that you guys have found out about me. Its not easy to come into a forum cold turkey. I have lots of parts for Comanches and lots of other Jeeps. For sheetmetal, what I regularly keep in stock is the following for Comanche's: Rocker Panels L/R Floor Pans Front L/R Floor Pans Complete (include under seat) L/R Bed Sides L/R Bed Floors in 1/2's L/R Plus anything that crosses over to an XJ. For the post above about the NOS wide trac cherokee body, the one sold on ebay did not come from my place, but I have one just like it. I will say, I don't have much MJ stuff on my website, but it is available and if it starts selling I will get it up there to make ordering easier for you guys. For now, please feel free to use the contact information below. Thanks, Zack Heisey zack@zmjeeps.com http://www.zmjeeps.com Z&M Jeeps Ltd. 419.893.4533