aussiebob
-
Posts
27 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by aussiebob
-
Hard to get a torque wrench on a lot of those manifold bolts any tips?.
-
Do you have to remove the studs on the cylinder head to get the manifold off, any tricks?, 88 4.0 ls it a must to remove fuel rail?
-
Just when l was going the heat method way did one last soak with liquid wrench and hammered the crap onto the bolt what a feeling when that sucker started a slow move! 4 1/2 days of soaking and hammering on manifold bolt head.
-
Been doing that the last few days and banging on the head ,man its in such a bad spot and not given!.
-
Have a cracked header and that #2 manifold bolt is frozen not keen on using heat any thoughts?. 88 4.0 Took 4 1/2 days soaking and hammering.
-
This has to be one of the best web sites around with the incredible knowledge of this awesome group of people keeping these amazing machines alive and functioning!. Kudos to all.
-
No all tight!.
-
Will break out the halogen and check under dash!.
-
No tach but idle when warm is low1.
-
Entire secondary ignition all in great shape!.
-
Shuts off like a switch!.
-
I'm every now and then having my engine shut off under braking then no problem restarting, its the amazing 88 4.0L power plant and auto trans, any thoughts?.
-
Thanks for the input guys had a bad knocks sensor!.
-
4.0L 88 Whats the sensor on the block below the manifold?.
-
New 02 Sensor wham!.
-
Thanks guys bad wiring!
-
Lost voltage to fuel pump any ideas 88 4.0 L
-
gogmorgo....califorina smog check.....thanks for the input.
-
After remedy for running rich 4 litre?
-
For insurance.
-
Does the 4.0L 1988 have a OBD PORT
-
Thanks gogmorgo back manifold bolts where loose ,back to normal. Kudos Mate.
-
88 Comanche 216000 miles original 4 litre engine..still rocks...no body work no rust and spends a lot of time right next to the beach...a keeper!. -