Jakeman17

Decorated for Toys for Tots

Cleaned inside. Working on CB still

Sorry i didnt make it Correy!

Image Not Found Image Not Found Image Not Found Image Not Found

Yes axle is all done it got aligned today. Wasnt too bad. but the steering wheel is at least straight now. and there is one ball joint that caused caster to be out bc it was not adjustable. Working on installing CB now almost done

Today I Went to pick up my parts I ordered. Got to my jeep and they were wrong parts so Matt and I spent all morning looking for right parts. Finally I got the rotors and found out calipers were wrong.... I got them from Napa put them on got everything put together. I could not bleed the brakes. Rob got home and the calipers were on wrong so they bleed fluid right away. but it runs needs a alinement tomorrow and I'm all set Wrong parts and 2WD axle Image Not Found Image Not Found Image Not Found

Today I Went to pick up my parts I ordered. Got to my jeep and they were wrong parts so Matt and I spent all morning looking for right parts. Finally I got the rotors and found out calipers were wrong.... I got them from Napa put them on got everything put together. I could not bleed the brakes. Rob got home and the calipers were on wrong so they bleed fluid right away. but it runs needs a alinement tomorrow and I'm all set Wrong parts and 2WD axle Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Thanks to Rob and Correy for their help. I could not have done it without them.

Image Not Found Image Not Found Image Not Found

Yesterday- Started Axle swap. The kid who had it before me out a 3'' lift with a about 2 inch spacer and th e back was only 3. TOday Got new brakes lines(flex lines) and Spring Isolators, got axle all in and tightened up. went to to brakes on and wrong rotors(1 was 2WD the other was 6 lug). No problem went to Advanced Auto and they didnt have them until tomorrow at 7:30 AM so i ordered then and would put the $#!&ty ones on jsut to get it running tonight. go to put pads on…… wrong pad and calipers(for 2WD) so out on my 45 min trip to Napa distrubution center I got all wrong parts. So i ordered them from Advanced Auto. Everything will be in tomorrow at 7:30AM and I will start as soon as i get out there. Also I drained my trans fluid well it all come out when we pulled driveshaft. Looked like a Chocolate Shake so i got that changed today also All that is left is put on brakes and bleed them. Image Not Found Image Not Found Image Not Found

Removed Calipers got new calipers rotors and brake fluid bought a CB

He asked me to call him when I was half hour away but I'm still trying to find a ride there

well I'm still gonna find a way up there somehow

Wow My friend just bailed on me for tomorrow. So I'm working on finding another ride ill let you know when i know My other friend blew a gas line and its getting fixed in the morning

:cheers:

Got my axle TODAY!!!!! Thanks Correy. Going to drop it with Mj in a little bit. and spray bolts with PB

nope never

Just found out my tow was for free money wise but I just have to do some manual work for the shop :banana: :banana: :banana: :banana:

Nope not repo this time no Chip either

Image Not Found Image Not Found

Let it sit at shop

We are lol

He told me 9AM how far are you from IL?

HERE IS THE HOLE STORY I WAS ON MY PHONE so I AM AT A COMPUTER NOW So on Monday I was drive to school. i was getting onto 53 and I heard a grinding nosie from the front. I had to e at school since it was the first day of new class. So i baby'ed it all the way to school. I got on 355 and as I was going to get off on Army trail road I pushed the brakes and pedal went to the floor. So i pumped alot and got it to slow down. At that point i was almost to school. So i pushed it and got it to school. So I was not gonna drive it all the way back home with no brakes. So i called my mom told her what was going on and that I had to talk to my teachers see if anyone was in lab. No one was in lab bc it wa sfirst day. So i called my friends shop who tows and they came and got it after school. i rode back with him. We got to shop and dropped it. They got a chance to look at today and it needs and new pass side spindle. My wheels bearing were so bad it ruined the spindle. So this was at 4:45PM today. So i started calling everywhere to find a spindle nothing. i called a guy who has extra parts for everything. and nothing. So looks like i am gonna be putting in a 4WD axle. So there is my first step to 4WD. I'm making this postivite

Thanks Rob

Nope it is a 5 speed 4.0L