Scalped

Pictures pretty much sum it up.. I will say it would have looked a little better if I had built it up where the door card had vanished. Materials were plastic no parking sign , vinyl and plastic glue( 30 min) and duct tape. Corner was completly gone and flopping Traced radius on sign and cut it out.. Glued plastic to door card.. Glued and taped fabric to card.. Maybe not professional, but at least its not flopping

I'm a big guy! Lol

Got my seats put in! A few odds and ends basically done. Will add some pics of a few things that made it easier.. Its for sure the 99 xj seats were not even close. It was a bear making them fit like stock seats. Started out with bench seats. The drivers seat bottom metal disetigrated when I started fooling with it so I came up with a zip tie solution. 175 # zip ties I hope will hold up. I couldn't make the comanche brackets work with the xj slides so I got these from Amazon... They worked great I used these sleeves from Summit to keep the seat belts handy

Thx

I am planning g on raising and scooting my bench seat back for comfort. Any proven ideas I may use? Thanks Steve

Thx for the reply... I would swap it all if I did it...just wanted to be sure before I make a decision

I have a 91 2wd with 2.5 five speed. Will that engine bolt up to 86 auto 4x4 that had a V6 in it Thanks so much Steve Eggers

Thx for all the responses

SORRY GUYS I actually thought I was pretty specific. Minor dents mean virtually none.clear coats peeling kinda speaks fir itself Could paint it and be happy cept one on front fender I have clean fender same color.. no rust any where but a bit of light surface in the bed .. there were but I cut the floor pans out and welded new ones in. If I get a chance I'll post some pics but been laid up with my back. .. sorry I rubbed yall the wrong way. But the pic with the header is pretty much what she looks like. I think I replaced hood and a door since the pic there Some mjs may be rust buckets but this ones not.. Yall have a nice day!😊

Almost 400 views ..surely someone knows the approximate value... I'm really out of touch with what the MJs bring. Not wanting to get rich just wanting to get a fair price if I decide to sell. Thx Steve

91..2.5...5speed ..ac..minor dents.clear coats peeled off...new floor pans welded in place.. everything works good.. 18 mpg

Engine us strong but my legs are getting weaker. Has it got enough umph to drive the 700 r4?

Thats encouraging.. Thx

Right now north of 180K and still running fine

Are there any post on raising the back of a bench seat and maybe scooting it back a little? Thx Steve Eggers

Haven't thought about the decal route.. would sure be easier Thx

My under the bed tire carrier is broke. It had at one time a donut spare. I would like to fix it but was wondering if will handle a full size tire. If not I'll go another route. Thx Steve Eggers

My Comanches white so I think I'm going a grey metallic to match my wheels with a white so I don't have to strip everything off.( going to leave inside of doors and engine compartment..and chassis white) What kind of ideas yall got ? Pics would be nice Thx Steve Eggers

Thx everyone

Put new wheelhouse plastic in today but there's still a piece missing at the front of wheel well low.. there's 2 holes punched that looks like something is missing. Any ideas?

Thx

After 7 years and 40000 miles I'm deciding to fix her up a bit. Originally bought for a diesel conversion but it ran to good to jerk the 2.5. My main question is what year XJs parts will fit interior ?....Mainly dash, door upholstery and bucket seats and console. Side note the 2.5 is still strong with 180,000 miles but looking into a 320 hp 4 banger, trans and rearend swap. Old lady didn't want me to sell so going to throw some money at it.

thx

light is on