UkeeManche
-
Posts
57 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by UkeeManche
-
Stuck Finally made it out after leaving him over night. We came back the next morning with my buddies rokee with a winch
-
Lil bit of wheelin
-
We had to drive through the bush to get out :P
-
A few picks of the camping trip before the river flooded
-
-
Took a load of wood to where were going camping next week. I drove down our twisty high way with a huge lift, no sway bars, and on my overloads :P.
-
Got my shocks installed last week :D. They were too long for the stock mounts, so i chopped the lower mount off and made a new one a few inches lower. They are 13.5" travel skyjacker m95s.
-
Painted the front diff
-
So everything is done for now except the front shocks. :) The gearing is perfect for my needs. Manche next to my buddies rokee with a 6" lift and 33s
-
Project "Eliminator"
UkeeManche replied to 89eliminator's topic in MJ Hardcore Tech: Epic Journeys to Greatness
Ok sweet thanks -
Project "Eliminator"
UkeeManche replied to 89eliminator's topic in MJ Hardcore Tech: Epic Journeys to Greatness
What diameter and thickness of tubing did you use for your cage? -
I refuse to comment on a man's dog, his choice of woman or his "junk". Hahaha, just to clear things up... yes that is a penis. We were camping next to a bachelorette party :P
-
Got the bench in :D Also got the 35s mounted on rims and put them on the back. Now i just have to finish up hooking up the brakes, and wait for my shocks :D
-
How it looks with 31s. I got some 35s from a friend that i just gotta get mounted. After that its just the brakes, shocks, and put the bench seat back in :D
-
All the suspension stuff is hooked up except the shocks. Those are gonna take a few weeks to get here.
-
Modified my stock lca so that they wouldn't bottom out on the axle mount. I know it looks really ghetto :P, but I'm gonna stress test the $#!& out of them before i do any serious driving. Also got my drop brackets in, but realized that the braces don't fit comanches :P . So i might make my own out of some 1/4" plate.
-
The plans are to get the axle, suspension and interior back in. Its been off the road for a month now and its really sad. I also have to find some 35s to replace my tiny 31s
-
I'm also putting a 4.10 dana 30 in the front to match the rear.
-
I'm now lifting the front with 7.5 inch lift coils. So the stock track bar is not going to work, so I'm modifying it to work. I cut the tie rod end off and I'm replacing it with a bushing i got from when my parents lifted there Jeep Patriot. Then I'm modding the bracket to except the new bushing.
-
My buddies Rokee with a welded dana 35 on 35s finally broke. It lasted longer then i thought it would.
-
Oh yeah here's a pic of Manche with the 8.8 under him (SOA). So the rear is at about 8-9 inches of lift with the front at 3 and a trim.
-
Ripped out my carpet and found this... Cleaned it up Used some sheet metal from a Subaru, a few tubes of silicon and self tapping screws. I would have welded it but i only have a big arc welder and I'm impatient.
-
My buddies stock TJ full of condoms. :P
-
Got some really bad death wobble and found out why. (this is the track bar bushing)
-
1/4 angle iron adjustable shock mount.