Jump to content

xComancheKidx

Members
  • Posts

    53
  • Joined

  • Last visited

Everything posted by xComancheKidx

  1. yea i thought there might be a few more..wasnt too sure on the gas tank but thought the straps were attached to the bed...and yes ill need luck being as one of the back bolts closest to the bumper stripped on me :mad:
  2. i am currently in the process of removing my bed..i have gotten 6 bolts that attach the bed to the frame..i have removed the spare tire holder and the ebrake bracket as well...i was wondering what else i have to remove in order to take the bed totally off
  3. yea i just replaced my exhaust manifold so i think maybe i forgot to hook a hose back up or tweaked something..I'm going to look everything over
  4. hey all I'm having some issues with my idle and was wondering where i should start to diagnose the problem.. its a 4.0 and when i start her up the idle is unusaully high and will continue to idle high while running..any help?
  5. thanks guys..couldnt quite find it when i was on there
  6. hey all..my Crankcase Ventilation fresh air hose is shot and i can't seem to locate a new one...also the grommet that connects this tube to the valve cover is missing...does anyone know where i can buy a new tube and grommet?
  7. hey all i just replace my exhaust manifold..what a :mad: ...does anyone have a picture or diagram of where the hoses that run from the airbox go to..i took them off a while ago and can't remember where they go
  8. i am on hell creeks site and i pulled up the comanche 4.5 lift leafs...is it really only $156 for a pair or am i missing something here...this is alot cheaper than motion
  9. any one had any experience with this kit? i was thinking about purchasing it
  10. Just had the pleasure of pulling my exhaust manifold gasket..what a PITA...well i found out the gasket wasnt the problem :fs1: my manifold is cracked in two places very bad...so here is where my question comes in...i have two options..i can either pull one at a junkyard...or buy a new one...now i know most of you will strongly advise to buy a new one but I'm on a tight budget and id like to spend the money elsewhere..is there any manifolds out there for a decent price? and what are your opinions about pulling one from a junkyard?
  11. how much lift will i gain from v8 grand cherokee coils?
  12. does the foam mat under the carpet up by the pedals and across to the passenger serve any purpose or can i just yank her out?
  13. well i have a dd already..so not too often...I'm sure ill end up cruising around town with her occasionally
  14. yea i figured 31's would be good for now...as for the type of wheeling...nothing too crazy..at least i think :yes: ...so what is my best cost effective way to get 3" of lift?
  15. ill be doing a decent amount of wheeling...right now id like to stick with 31's...i have a pair of 33's but I'm going to wait until i upgrade/beef up my axles to go bigger
  16. hey all..I'm in the process of fixing up my mj and a lift is definitley on my list of to do's...i want to go with a decent size lift for now until i find a beefier rear and the $$$ for SOA... i was thinking a 3"-4" lift for now so i can work out all the kinks and not burn a hole in my wallet( college budget :fs1: )...so what do you all think is a decent lift kit..or should i piece it all together....i kno i am going to need: leaf packs, coils, new shocks, adj. track bar, LCA's and maybe UCA's ..not sure on the SYE..ive heard that for mjs with a small amount of lift it is not needed?..so my question is what is the best deal for me?
  17. every time i start the manche my 4x4 light is on and remains on while it is running even though i am not in 4 wheel drive...does anyone know what could possibly be causing this?
  18. sweet thanks :clapping:
  19. will an xj knee bolster bolt up to my comanche?... mine is cracked in various places and I'm sure it will be more difficult to find one in good condition off of a comanche rather than a cherokee :mad:
  20. what is the most desirable year xj seats for a bucket swap..also will any year center console fit?
  21. truck looks great keep up the good work...what suspension mods do you have planned?
  22. yea i have american racing wheels.not sure on the backspacing...i might be able to pick up a pair of zj coils.. my stock coils are shot and i was wondering if the zj coils would give me any lift?
  23. off road..4 wheel drive..sagging suspension :fs1:
  24. just picked up a decent set of 31s and i was just wondering what i need to fit them on my rig without any rubbing
×
×
  • Create New...