HardRox-MJ Posted November 6, 2011 Share Posted November 6, 2011 i can get my hands on the front of a 99xj and was curiouse if its a direct bolt on to my 89mj... or do i need to change fenders and hood aswell? cause my fenders and hood r mint Link to comment Share on other sites More sharing options...
lostissues Posted November 6, 2011 Share Posted November 6, 2011 hood is fine, fenders are a little different. and it pretty much bolts in. the only thing is that the newer fenders have a stud on the front that goes through the header panel with a nut to hold it tight. the older fenders don't have that stud. Check the 14th post down on this page viewtopic.php?f=2&t=14741&hilit=fender+swap, it shows a 97+ header with 96- fenders. Link to comment Share on other sites More sharing options...
HardRox-MJ Posted November 6, 2011 Author Share Posted November 6, 2011 ok so all ill need it the header thefenders and the light sockets seems easy enough thanks for finding that link cheers Nick Link to comment Share on other sites More sharing options...
lostissues Posted November 6, 2011 Share Posted November 6, 2011 no problem, the wiring is pretty easy, I myself just made an adapter to go in between the wiring, others have just added the side marker lights to the old wiring. viewtopic.php?f=2&t=18186 viewtopic.php?f=2&t=4306& Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now