kar120c Posted October 19, 2011 Posted October 19, 2011 Looking for a front CV shaft to finish my 4wd conversion. Transfer case is the NP231 and collapsed length needs to be a little over 25 inches longs (center of cap to cap). :wrench:
Dadinator Posted October 19, 2011 Posted October 19, 2011 Will the stock one work? I have one. I'll have to measure. What do you want to spend on it? Might be a bit to ship it to OR.
kar120c Posted October 20, 2011 Author Posted October 20, 2011 I don't run a lift, I need a stock style front shaft. Has to be from a 4cyl, manual transmission setup. All the other drivetrain combos are way too long, 30-40 inches. Anything longer than 26" collapsed, isn't going to fit. While I'm not a cheapskate, I don't want to pay the $200 that a couple local junkyards wanted. If you have one that works, that would be great. I suppose you'd need to check what shipping costs first though. Let me know, thanks! :thumbsup:
WA_ZJ_Guy Posted March 12, 2012 Posted March 12, 2012 Looking for a front CV shaft to finish my 4wd conversion. Transfer case is the NP231 and collapsed length needs to be a little over 25 inches longs (center of cap to cap). :wrench: I'm in Spokane. I have one from a 2.5L, 4spd with NP207 transfer case. I can measure it if you still need one. If you need any other parts, let me know. I have a complete parts rig.
Recommended Posts