SquirtxJeep

no the frame isnt rusted out but my dad went cut happy on it and cut a lot of it up and i removed the rocker panels from it. the floors were mint. the only problem was the overheating issue.

well did a lot this week and took about the donor completely and it'll be going to the scrap yard saturday. then i'll start to take apart the comanche. :wrench: will post pics up soon of the cherokee (scrap pile) on the way to the scrap yard.

i got the xj running fine but then the mj started acting up and i needed to make a choice keep the xj or keep the mj. that was an easy choice. GUT THE XJ! no more front clip or doors took out the engine bay wiring harness and next the drivetrain took out as much of the interior as i could to update the comanche

bought a nice 99 xj from a friend a couple months back. he said there was an overheating problem with the truck. i ran it for a bit to hear the motor and to see what was wrong. upon further inspection i noticed that he just recently replaced the radiator hose and didnt install the clamp right so it leaked bad. so i got it to run fine. the kicker was i only spent 400$ on the thing.

tear up the carpet and check the floors for rot. fix that before the lift.

I need a bed for my jeep comanche. looking for a shortbed in the mass area. will travel to pick it up if its in a reasonable distance. please just shoot me a pm you have one or kno of someone selling one.

anybody have any tips or instructions on doing a 97+ dash conversion in a comanche? i bought a whole donor truck and will prob switch over the whole wiring harness i just need some helpful tips. thnx

The floors are all set and solid. Got the new ax15 in and all set :) 31" tsl super swampers They look soo aggresive. Just need wheel spacers now cuzz they do rub a little bit. I just needed to take this pic. She looked so nice when i walked out of the bank. The first day out and the transfer case breaks. WTF

Ok so I got the truck on the road and took it out and broke the transfer case. It won't stay in 4wd. But I did pick up a new one for free. I am looking to piece together a lift kit for the truck tho. Does anyone have any suggestions on what parts I should pick up from where?

havent updated this post in awhile but ill be sure to put up some pics later. i was jus wondering if anyone has any info on some 6.5" lift kits. ive been looking at both rough country and OME kits. jus wondering what people think bout these. if anyone knows how or were i can get a cheap lift let me kno. id like 6+ and to run 35s.

yea i thought the same thing but i did research and what i found was that once you unscrew the door it never closes the same again and it can leak and what not. but i read on another forum that someone did it the same way and it worked out fine.

ive recently started to work on the body work of the bed and the tailgate handle broke so now i need a new one. anyone selling one or kno where i can buy one? none of the salvage yards in the area have comanches. can i use one from another truck? any info you have can help.

hi I'm looking for a tailgate handle. i live in mass so if you leave far away ill pay for the shipping

for a little advice. anyone who wants to take there doors off like i did use an air chisel. i got the passenger door off in less then a hour. now i jus gotta fix the doors and weld in new body panels for the body to be done. then put in a new clutch for the transmission to be set. i also picked up a set of 33x12.5r15 for $100. the rims however don't fit so ill need another set or install them on the stock ones?

i agree my brother did the same thing with grey and his grand am. how did you apply it? jus like a normal spray or up and down like painting your house?