Dash lights and running lights out

[th3m4nm4rcu5]

Okay, so I've been doing body work and painting my Comanche. And I've got the bed off, with the gas take on some 2x4s ratchet strapped down. The tail lights zip tied on, the head lights zip ties on, cause I took the whole front clip off. Well now my running lights and dash lights fuse is blowing. I out a new one in and it blows when I take off down the road. It must be a bare wire Arking somewhere, or a bad ground somewhere. I got my ground in the back left tail light wedged into the frame, it should be grounded good. All my other lights work, turn signals, etc. I didn't have this problem until I took the bed off, I couldn't find any bare wire spots. Any ideas?