wallisek Posted October 19, 2011 Share Posted October 19, 2011 Looking for a front CV shaft to finish my 4wd conversion. Transfer case is the NP231 and collapsed length needs to be a little over 25 inches longs (center of cap to cap). :wrench: Link to comment Share on other sites More sharing options...
Dadinator Posted October 19, 2011 Share Posted October 19, 2011 Will the stock one work? I have one. I'll have to measure. What do you want to spend on it? Might be a bit to ship it to OR. Link to comment Share on other sites More sharing options...
wallisek Posted October 20, 2011 Author Share Posted October 20, 2011 I don't run a lift, I need a stock style front shaft. Has to be from a 4cyl, manual transmission setup. All the other drivetrain combos are way too long, 30-40 inches. Anything longer than 26" collapsed, isn't going to fit. While I'm not a cheapskate, I don't want to pay the $200 that a couple local junkyards wanted. If you have one that works, that would be great. I suppose you'd need to check what shipping costs first though. Let me know, thanks! :thumbsup: Link to comment Share on other sites More sharing options...
Dadinator Posted October 20, 2011 Share Posted October 20, 2011 Mines from a 4.0, sorry... Link to comment Share on other sites More sharing options...
wallisek Posted October 21, 2011 Author Share Posted October 21, 2011 Thanks for trying! Link to comment Share on other sites More sharing options...
WA_ZJ_Guy Posted March 12, 2012 Share Posted March 12, 2012 Looking for a front CV shaft to finish my 4wd conversion. Transfer case is the NP231 and collapsed length needs to be a little over 25 inches longs (center of cap to cap). :wrench: I'm in Spokane. I have one from a 2.5L, 4spd with NP207 transfer case. I can measure it if you still need one. If you need any other parts, let me know. I have a complete parts rig. Link to comment Share on other sites More sharing options...
Recommended Posts