jeep_freek88 Posted August 8, 2008 Posted August 8, 2008 The tire shop says they won't allign my truck because i have a bad ball joint! :headpop: how do i check to see if the ball joint is really bad because i think there full of you know what? thank for any info.
CWLONGSHOT Posted August 9, 2008 Posted August 9, 2008 Jack up the truck so the front wheel (s) is about 3-4" off the ground. Get a piece of pipe or strong board. Something like that is at least 4" long. Insert it between the ground and your tire and try to lift the truck. There shouldn't be any movement. If the ball joints are bad you will likely get a "clunk". Repeat on the opposite side. They CAN BE a bugger to change. Not really hard, but there are a number of pitfalls along the way if your not experienced with the job. CW
jeep_freek88 Posted August 9, 2008 Author Posted August 9, 2008 thanks. I did that and the passenger side upper and lower are bad.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now